1. Hydraulic press structure:
  2. Main engine: include bottom board, stand column, squeeze chamber, oil tray, screw nut, etc, the material in the chamber which put

Up forward by the cylinder force and extruded by the squeezing bolt, oil flow out from the chamber and in to the oil tray

  1. Conveying hydraulic: it is the machine power source, include drive shaft, worm gear, worm, gear pump, high pressure pump, overflow valve

Manual valve, cylinder, etc, advanced pump equipped, low speed, big oil pressure, thermo stability

  1. Electric controlling: include electric motor, voltmeter, temperature adjusting meter, pressure gage, power insurance
  2. Features of hydraulic oil mill:
  3. Small area covering, easy operating, easy learning, power saving
  4. Hydraulic system, high pressure, high oil rate, good oil quality
  5. Full automatic controlling, automatic controlling preheating temperature and hydraulic pressure
  6. Machine operating procedures:
  7. Before starting up, clean the oil tank and add enough hydraulic oil, check the bolt and screw whether loose, check the circuit connected
  8. Preheating before machine working each time, in summer and autumn the preheat temperature is 50-70, winter and spring is 70-90

The preheat system is automatic , no need close the temperature controlling switch

  1. Hold the up board handle, open the up board, put a cushion under the squeeze chamber, fall the piston
  2. Trial running the machine 1-2minutes before each working, in winter trial running 5-10minutes
  3. Put the roasted and cooled sesame in the squeeze chamber, not hot material
  4. Operating person must not leave machine when working, when the pressure gage arrive 55Mpa, stop machine working, or close the power

Check the voltmeter whether broke down, make sure everything is ok then working

  1. when the pressure low to 45Mpa, electric system auto open, squeeze chamber no oil flow out, that means all the oil has been extruded outTechnical data:Pressure: 50mpaForce: 120tInside diameter: 230mmPiston journey: 500mmVolume: 10kgCapacity: 200kg/8hPower: 5.5kwMaterial: stainless steelWeight: 1300kgOther name: hydraulic oil press, hydraulic press, hydraulic oil mill/cold extracting avocado oil machine,hydraulic water press,hydraulic water extract, commercial oil making machinecashew shell oil extraction


Video clip: https://www.youtube.com/watch?v=RH5RYZsukrk